Available Diameters
Round 2.00 mm-90 mm
Hexagonal 6.00 mm-60 mm
Square 6.00 mm-60 mm
Our standard size is 3 M length but according to customers’ demand, specific diameters and sizes can be produced.
Transmission shaft is a kind of high resistance steel due to it’s low Carbon (C) and high manganese (Mn) values. It is devided to St37-2, St52-3, St44-2,…. classes in which St44-2 and St52-3 materials’ quality are more durable than others.
Because of it’s precision measure tolerances, these shafts are used as cold drawn and produced within the h9-h11 tolerances, due to it’s high surface sensitivity.
According to customers’ demand, packaging can be done in a protective, custom packages (Jute, crate, etc.).
Technical Specifications Table
DIN |
EU |
MATERIAL |
CHEMICAL COMPOSITION (%) |
||||
NORM |
NORM |
NO. |
C |
Si |
Mn |
P |
S |
St.37-2 |
S235JR |
1.0037 |
< 0,17 |
< 0,30 |
< 1,40 |
< 0,045 |
< 0,045 |
St.42-2 |
S275JR |
1.0042 |
< 0,23 |
< 0,30 |
< 1,50 |
< 0,045 |
< 0,045 |
St.50-2 |
E295 |
1.0050 |
< 0,30 |
< 0,30 |
< 1,40 |
< 0,045 |
< 0,045 |
St.52-3 |
S355J2G3 |
1.0570 |
< 0,20 |
< 0,55 |
< 1,60 |
< 0,045 |
< 0,045 |
St.60-2 |
E335 |
1.0060 |
< 0,40 |
< 0,30 |
0,60 - 0,90 |
< 0,045 |
< 0,045 |
St.70-2 |
E360 |
1.0070 |
< 0,50 |
< 0,30 |
0,60 - 0,90 |
< 0,045 |
< 0,045 |